 |
| Analytical/Industrial
X-Ray Tubes |
|
 Analytical |
Since the diffraction phenomenon of
X rays was discovered, X-ray analysis is applied to
research of crystal structure, qualitative analysis
and quantitative analysis of elements and compounds,
stress measurement, X-ray spectroscopy, etc.
Toshiba can provides ANALIX (Toshiba X-ray tubes for
analytical application) with various-material targets
for wide range of applications.
ANALIX for X-ray diffraction is used for various analysis
systems for single crystal And high polymer structure,
and it has an air-insulated, water-cooled and grounded
anode with four-radiation beryllium windows. Line
focus is available through one pair of windows, and
point focus through the other pair.
ANALIX for stress measurement is an X-ray tube to
measure an internal stress of material by observing
deviations of the lattice spacing from its normal
state by means of X-ray diffraction.
ANALIX for fluorescence spectroscopy is installed
to a housing to be filled with insulation oil and
to be protected against electric shock and X-ray radiation.
All ANALIXs hav e a water-cooled anode and a very
thin beryllium window, so they provide high X-ray
transmittance to wide range of X-ray wave length. |
| |
| Industrial |
| Industrial X-ray tubes are provided
with various applications such as non-destructive
inspection and thickness gauging. The vacuum envelope
of industrial X-ray tube is made by glass or ceramic.
Ceramic material is mechanically strong, which can
makes X-ray tube with portability and good handling. |
Another window opens |
Analytical
|
Type |
Target
Material |
Focal
Spot
(mm) |
Max.
Rating
(kW) |
Max.
Voltage
(kV) |
Max.
Current
(mA) |
Circuit
(1) |
Target
Angle
(degree) |
Be Thickness
(mm) |
Dimension
Length x Diameter
(mm) |
|
A-26L |
Cr/Cu |
0.4x8 |
1.5 |
60 |
40 |
AG,C |
0 |
0.3 |
65x230 |
| Fe |
0.9 |
| Co |
1.2 |
| Mo/W |
2 |
|
A-40 |
Cr/Cu |
1x10 |
2 |
60 |
50 |
AG,C |
0 |
0.3 |
65x217 |
| Fe |
1.5 |
| Co |
1.8 |
| Mo/W |
2.4 |
| A-41L |
Cr/Cu |
1x10 |
2 |
60 |
50 |
AG,C |
0 |
0.3 |
65x230 |
| Fe |
1.5 |
| Co |
1.8 |
| Mo/W |
2.4 |
| A-46L |
Mo/W |
2x12 |
2.7 |
60 |
60 |
AG,C |
0 |
0.3 |
65x230 |
|
AFX-66D |
Mo/W |
7x7.5 |
3 |
60 |
80 |
AG,C |
26 |
1 |
89x498 |
| Rh/Cr |
0.3 |
|
AFX-76H |
Rh |
Φ14 |
3 |
75 |
100 |
CG,C |
90 |
0.127 |
103x459 |
|
AFX-76UT |
Rh |
Φ14 |
3 |
75 |
100 |
CG,C |
90 |
0.06 |
103x459 |
 Notes
1. AG: Anode grounding, CG: Negative pole grounding, C ->
constant voltage
Industrial
| Type |
Target
Material
|
Focal
Spot
(mm) |
Max.
Ratintg
(W) |
Max.
Voltage
(kV) |
Max.
Current
(mA) |
Circuit
(1) |
Target
Angle
(degree) |
Be
Thickness
(mm)
|
Dimension
Length x Diameter
(mm) |
|
I-212 |
W |
1 |
115 |
50 |
5.3 |
CG,C |
20 |
0.5 |
155x40 |
| Rh |
1 |
50 |
50 |
3.3 |
CG,C |
20 |
0.2 |
155x40 |
|
I-311 |
W |
0.1 |
50 |
100 |
0.83 |
CG,C |
10 |
0.5 |
180x62 |
| I-312 |
W |
1 |
350 |
100 |
3.5 |
CG,C |
20 |
1 |
185x62 |
|
I-670A |
W |
2 |
1000 |
200 |
5 |
AG,S |
22 |
1 |
186x132 |
|
I-870A |
W |
2.5 |
1500 |
300 |
5 |
AG,S |
22 |
1 |
198x132 |
|
I-2112A |
Mo,Rh |
0.8 |
50 |
50 |
1 |
CG,C |
33 |
0.05 |
96x33 |
|
I-2113A |
Mo |
0.15 |
75 |
50 |
1.5 |
CG,C |
10 |
0.05 |
96x33 |
|
I-2115 |
W |
0.1 |
50 |
60 |
1.2 |
CG,C |
10 |
0.2 |
96x33 |
| I-2115A |
Mo/W |
0.15 |
75 |
50 |
1.5 |
CG,C |
10 |
0.2 |
96x33 |
Notes
1. AG: Anode grounding, CG: Negative pole grounding, C -> constant voltage
|
